Tungsten Steel weighs almost twice as much as conventional tool steel which makes it a perfect material for manufacturing a small yet HEAVY Bucking Bar. As you know, the heavier the bar, the easier it is to shoot your rivet. With conventional steel bucking bars, installing rivets in open areas has never been a problem, but when the rivet is in a confined space and the ability to use a heavy enough bar to properly install the rivet without work hardening is not possible, you can now use our small yet heavy Tungsten Bucking Bar.

The Tungsten Bucking Bar in the picture weighs a full 0.74kgs, but is only 4" long x 1" wide x 5/8" high. Features a flat end on one side and a slight 15 degree angle on the other side. All corners are radiused to prevent material damage, and all surfaces are polished to permit bucking on any side or surface of the bar.

By using Tungsten Bucking Bar, bucking rivets will be twice as easy as using a conventional tool steel bucking bar of the same size. More detail can be find from www.buckingbar.com.cn. Maybe tungsten Steel is very expensive as compared to standard tool steel, but we have secured the lowest possible price for this bar by manufacturing in a large quantity, and we are passing the savings on to our customers.

If you need any more details of the above news and/or products, please visit Chinatungsten Online, or contact us directly.
Disclaimer: The article is only reflecting the opinions of the author. We have no responsibility to prove the originality and authenticity of the content, words and/or pictures. You readers should just take it as reference and check the details by yourselves. And the content is not a suggestion for investment decision. The investor takes his or her own risks if he or she operates accordingly. If you have any dissent about the contents above, please contact the relevant author, or the webmaster. We will try our best to assist the dealing of the related issues. Thanks for your visit and cooperation.