Tungsten Carbide Graded Powder
Due to increased pressure from the EPA, and a desire for the finest possible grades of Tungsten Carbide, many companies turn to ATI Alldyne to pre blend ready to press tungsten carbide mixed with a variety of additives to attain specific attributes and qualities. For your convenience, we provide a sampling of our hundreds of catalogue grades, so you can get a sense of the range and variety of functions our grade powders can serve.
Tungsten Carbide Graded Powder: (Cemented Carbide), 60 mesh to 325 mesh all grades containing Cobalt (Co), Nickel (Ni), Titanium Carbide (TiC) TaC, NbC, Cr3C2, VC and others
Reproducibility in Hundreds of Varieties
ATI Alldyne is uniquely positioned to partner with you in the development and production of custom graded or ready-to-press powders. We have a catalogue of over 800 individual grades, with over 50 separate grades being produced each month. Our Gurley facility produces large varieties of graded powder under strict manufacturing guidelines so as to eliminate cross-contamination, and improve reproducibility.
 Standard and Customer Specific Formulations Available
Granule Size: -60 +270 Mesh
Typical Binders: 2% Paraffin Binders
All powder is commercially uniform in purity. The Chemical and Physical Analyses are determined for each production lot of powder by using commercially accepted methods. The results of all relevant tests are reported to the customer on a Certificate of Analysis.
Packaging:
50 kg/100 lb packed in a polyethylene bag within a 3½-gallon plastic pail, or 250 kg/500 lb packed in a polyethylene bag within a 17-gallon drum, or as requested by the customer.
| |
GWC-1 |
GWC-4 |
GWC-10 |
GWC-12 |
GWC-13 |
GWC-15 |
GWC-31 |
|
|
HRa |
92.7 |
92.0 |
91.0 |
91.8 |
92.0 |
89.7 |
88.25 |
| Density (g/cc) |
14.85 |
14.50 |
14.95 |
14.45 |
14.85 |
14.40 |
14.38 |
|
|
Co Wt% |
6.0 |
10.0 |
6.0 |
10.0 |
6.0 |
11.0 |
11.0 |
| Ni Wt% |
|
|
|
|
|
|
|
| TaC-TiC-NbC Wt% |
|
|
|
|
0.5 |
0.5 |
|
| WC Wt% |
94.0 |
90.0 |
94.0 |
90.0 |
93.5 |
88.5 |
89.0 |
|
|
Turning Ni, Fe & Co based high temp. alloys, Ti alloys, W alloys, Mo alloys, Zr alloys, Gray cast iron, Turning and Milling of Al. |
Turning Ni, Fe & Co based high temp. alloys, Ti alloys, W alloys, Mo alloys, Zr alloys, Gray cast iron, Turning and milling of Al , Textile shearing. |
Used for buttons in percussive drilling bits, both threaded and down¨Cthe¨Chole. Used in quarrying, mineral mining & waterwell drilling. |
For cutting operations at slow speeds where toughness is required. In addition it may be used on materials which require positive rake angles. |
For use as a general purpose C-2 carbide. Metal removal operations include turning, facing, boring & milling. Standard grade for brazed carbide tooling and woodworking tips. |
Heavy-duty machining at low speeds and interrupted cuts. May be ran uncoated or coated. Best heavy shock substrate available. |
Widest application of the general, all-purpose grades. excellent choice for a variety of brazed x & cross percussive bits, geophysical tips for drag bits & serrated compacts for drill string stabilizers. |
| |
GWC-50 |
GWC-52 |
GWC-53 |
GWC-69 |
GWC-71 |
GWC-73 |
GWC-75 |
GWC-76 |
|
|
HRa |
86.0 |
86.0 |
83.0 |
91.2 |
92.0 |
90.5 |
90.5 |
90.5 |
| Density (g/cc) |
13.98 |
13.40 |
12.95 |
12.43 |
12.85 |
12.85 |
15.0 |
14.50 |
|
|
Co Wt% |
15.0 |
20.0 |
25.0 |
10.0 |
7.0 |
11.0 |
|
|
| Ni Wt% |
|
|
|
|
|
|
6.0 |
10.0 |
| TaC-TiC-NbC Wt% |
|
5.0 |
5.0 |
21.0 |
12.5 |
10.0 |
|
|
| WC Wt% |
85.0 |
75.0 |
70.0 |
69.0 |
80.5 |
79.0 |
94.0 |
90.0 |
|
|
Recommended for rod mill rolls & heading dies. |
Heading dies, wear parts, blanking dies & impact extrusion tooling. |
Heading dies, blanking dies & impact extrusion tooling. |
Excellent grade for milling a wide range of materials such as alloy steels, tool steels & stainless steels. Designed to withstand heavy shock loads while providing adequate wear resistance for economical milling. |
Designed to resist wear, cratering & thermal shock, premium threading & milling grade for steel & steel alloys of various hardness. performs well on turning, facing, boring-milling -profiling & threading operations. |
An excellent grade for heavy roughing operations where interrupted cuts occur with extreme loading caused by high strength steels. |
Recommended for light impact & sliding wear applications:
- seal rings
- coal processing
- valve applications
- food processing
- nozzles
- corrosive crushing
- sleeves & bearings |
If you need any more details of the above news and/or products, please visit Chinatungsten Online, or contact us directly.
Disclaimer: The article is only reflecting the opinions of the author. We have no responsibility to prove the originality and authenticity of the content, words and/or pictures. You readers should just take it as reference and check the details by yourselves. And the content is not a suggestion for investment decision. The investor takes his or her own risks if he or she operates accordingly. If you have any dissent about the contents above, please contact the relevant author, or the webmaster. We will try our best to assist the dealing of the related issues. Thanks for your visit and cooperation.
|
